Stomp Motard 140

Price £1,349.00

Enquiry

Deposit £134.90

Buy Now

yellowlarge

Motard 140

The new Motard 140 is the ultimate supermoto pit bike. This bike boasts the upgraded SDG2 frame and the Detroit plastics, as well as the suspension from its podium-winning predecessor. This is the best supermoto bike in paddock.

 

Colours

Colours change and graphics kits are available, call for the latest details.

Key Features

It comes with a racing heritage of over 10 years winning pit bike supermoto races. The Motard features the ‘exclusive to Stomp’ SR140C Z40 cam engine. Stomp buy in the YX140 and then fettle the engine with stiffened valve springs & a high lift race cam (known as the Z40 cam). The result is 2hp more than any other YX140 engine on the market. You can use this in the standard class or fit any other engine and customize your set-up to your needs. Stomp have picked up numerous podiums over the years and the Motard 140 will give Stomp the winning edge in the 2017.

Specification

 

  • Stomp Racing SR140C with Z40 race cam
  • Start-in-gear, all-up 4 speed gearbox
  • 14hp at rear wheel
  • Detroit Race ignition with lightened flywheel
  • 26mm race carb with double foam filter
  • Aluminium shot blast finished cases with Stomp logo
  • Race oil cooler with braided steel hoses
  • SDG2 heavy duty cradle frame for ultimate stiffness and control
  • Removable rear subframe & bolt on engine hangers
  • Alloy sump guard / bash plate
  • 410mm alloy swing arm
  • SP 735mm cnc machined usd fully adjustable oil filled forks
  • Drop forged black anodised triple clamps (yokes)
  • DNM nitrogen filled 290mm piggy back shock
  • 12/12 sdg wheels with alloys rims 2.15 / 2.50
  • 15mm spindles, pre-drilled for crash bobbins
  • CST tyres – 110/80-12 / 120/80-12
  • Improved and revised light-weight brake master cylinders and calipers
  • 2 pot front brake / large 1 pot rear brake
  • Wavey discs – 210mm / 180mm
  • Brake snake to protect the rear brake pedal
  • Stomp Pro Race exhaust muffler
  • Mandrill bent big bore 32mm OD race pipe
  • Features full length alloy heat shield for style and protection
  • Renthal style minibike bars
  • Black wrap around hand guards
  • ¼ turn alloy throttle for ultimate responsiveness
  • Renthal style soft rubber grips
  • Forged alloy clutch & brake levers
  • Stomp logo cnc machined engine side cases
  • 420 KMC chain with engraved alloy/nylon chain guide
  • 420 41t lightweight durable rear sprocket
  • 420 16t front sprocket
  • Fold back gear selector
  • NEW upgraded PRO footpegs
  • NEW reinforced poly resin 5.5 ltr fuel tank with alloy CNC filler cap
  • NEW revised firmer seat with Stomp logo
  • NEW Detroit hi impact polypropylene plastics
  • Wrap around crf number board with front brake pipe tidy
  • New Stomp race graphics kit with Stomp race sponsor’s logos
  • Seat height 82cm
  • Dry Weight 71kg
  • Weight limit 15 stone

    Colours and specification may subject to change without notice
    All pit bikes come with a 30 day parts only warranty.

 

 

Maintenance Information

2 HOUR SERVICE After 2 hours carry out the following checks & procedures:

- Drain oil & replace with Putoline DX4 semi synthetic 10w 40 4-stroke engine oil
- Check all nuts & bolts & tighten where necessary (use PDI data as reference)
- Check flywheel nut - Check wheel spokes (especially rear wheel drive side) &      tighten where necessary
- Re-Adjust throttle cable & clutch cable if required
- Re-tension chain - Check wheel bearings for any sign of wear of free-play
- Check brake calliper operation & brake pad wear
- Check spark plug gap ~0.6mm-0.7mm
- Check tyre pressures

RIDING TIPS FOR LONG ENGINE LIFE - IMPORTANT
- Do not over rev your engine as you may cause damage to valves. This is  particularly applicable where an inner rotor kit is used. Under load the engine is  capable of revving into major valve bounce that can cause permanent damage  to your engine. If you feel the power dropping off or start to hear valve bounce it  is critical that you change up a gear or ease off the throttle.
- It is good practise to carry out the above checks on a regular basis, ideally each  time you ride your machine. We advise an oil change after every 10 hours use.
- Do not stamp through the gears – always use the clutch.
- If you miss a gear do NOT stamp into gear from high engine revs.
- Do not drop your clutch heavily, or slip it unnecessarily.
- Do not allow your air filter to fill with fuel – this can occur by incorrect float    height setting – see above, or the bike falling onto its side.
- If the engine back-fires while the air filter is filled with fuel, it may ignite
– check air filter regularly while riding

All pit bikes come with a 30 day parts only warranty.

Price £1,349.00

Enquiry

Deposit £134.90

Buy Now

yellowlarge1